Dental Multilayer Zirconia Block

Our Zirconia Block be made of the biological zirconia powder with isostatic pressing method and keep processing in machine center.We can do the zirconia block according to the clients the requirement.

HTZr-Normal translucent zirconia, applied for crown and bridges  STZr-Super translucent zirconia, applied for crown and bridges especially for full contour crown and bridges.

Inquire Now Next Product

Y203	5.3wt%
A12O3	0.25wt%
SiO2	≤0.02wt%
Fe2O2	≤0.02wt%
Na20	≤0.02wt%
Aging properties	monoclinic phase
Chemical solubility	≤200ug.cm2
Density	≥6.08g/cm2
Flexural strength	1000Mpa
Flacture toughness	5Mpam0.5
Hardness(Hv10)+2	1250

Nanometer zirconia powder	≥98%
CeO2	＜0.5%
Fe2O3	＜0.5%
Er2O3	＜0.5%
Other Oxides	＜0.5%
Diameter	98mm
Thickness	10/12/14/16/18/20/22/25mm
Color	A1,A2,A3.5,B1,B2,C2
Flexural streFeaturesngth	Monolithic crowns and bridges
	High aesthetic veneering
	7 layers with 7 popular colors

Our Zirconia Block be made of the biological zirconia powder with isostatic pressing method and keep processing in machine center.We can do the zirconia block according to the clients the requirement. HTZr-Normal translucent zirconia, applied for crown and bridges  STZr-Super translucent zirconia, applied for crown and bridges especially for full contour crown and bridges.

Product parameters

Sintering Chart

Recommended sintering cuve(HT-plus/ST/pre-shadeo ST/SHT/pre-shaded SHT)

Sintering temperature of HT/ST/pre-shaded ST/pre-shaded SHT is from 1500℃ to 1550°℃ you should makesure peak temperature at this
range. The recommend edsintering temperature is 1530℃.

Sintering temperature of 3D-pro is from 1480°C to 1530°Cyou should make sure peak temperature at this range. Therecom- mended
sintering tem- perature is 1500°C

APPLY

Dental Zirconia Block can be used for Dental laboratory or Dental clinic. Our Dental Zirconia Block are compatible with different kinds of CAD/CAM system and manual system.such as Open system Cercon system, Sirona Inlab system,and Amann Girrbach system

Product Application

Products Disply

Dental blanks

Multi-layer zirconia dental blank that has a gradual change in chroma and translucency though a thicness after sintering.

Zirconia powder

We choose the best zirconia powder and utilize a cold isostatic pressing system to from shapes.

Zirconia block

We try to provide high quality,low cost zirconia blocks for all dental CAD/-CAM milling system,support open ar-chitecture CAD/CAM
milling system.

 Our products are ceramic denture zirconia block,corre-sponding CAD/CAM equipment, 3D printing equipment and other related oral products. As professional oral materials   Supplier, we can provide digital dental materials, dental equipment, dental software and
full range of digital products and service 
 We strictly follow international and domestic medical stan dards.Inspectors in different positions including packaging to ensure the quality of products

Customer Feedback

TAGS:

Send a Message